Iron Ore Shaker 6S 4450 Centrifugal Gold Concentrator Separator
ISO9001
1, Product discriptions
The application of shaking table has a history of nearly 100 years.
The original shaking table was made for coal preparation in 1890 by
using the asymmetric reciprocating motion of bed surface caused by
impact. The 6-s shaker for beneficiation (beneficiation shaker) was
made by A. Wilfley from 1896 to 1898 and adopts eccentric elbow
mechanism. In 1918, plantio made another transmission mechanism
with cam lever. These two 6-s shaker head structures are still in
use after improvement. After the Second World War, Germany made a
fast 6-s shaker with eccentric drive. The inertia spring type 6-s
shaker was successfully developed in 1964 and has been popularized
and applied in production.
6-s shaker is a common beneficiation equipment for separating
fine-grained ores. When processing metal ores, the effective
beneficiation particle size range is 3 ~ 0.019mm, and the upper
limit particle size can reach 10mm. The outstanding advantage of
6-s shaker is high separation accuracy. After one separation,
high-grade concentrate or waste tailings can be obtained, and
multiple products can be connected at the same time. The flat 6-s
shaker is easy to take care of and adjust. The main disadvantage is
that the equipment covers a large area and the processing capacity
per unit plant area is low.
2, Technical Parameters
appellation | unit | Coarse sand table | Fine sand table | slimer |
Mesa dimension | length | mm | 4450 | 4450 | 4450 |
Drive side wide | mm | 1855 | 1855 | 1855 |
Concentrate the wide | mm | 1546 | 1546 | 1546 |
Maximum particle size | mm | 2 | 0.5 | 0.15 |
For ore | t/d | 30-60 | 10-20 | 15-25 |
Feed concentration | % | 25-30 | 20-25 | 15-25 |
trip | mm | 16-22 | 11-16 | 8-16 |
frequency | f | 15-48 | 48-53 | 50-57 |
Table wash water | t/d | 80-150 | 30-60 | 10-17 |
Transverse slope | ° | 2.45-4.5 | 1.5-3.5 | 1-2 |
Longitudinal slope | % | 1.4 | 0.92 | … |
Countertop Angle | ° | 32-42 | 40 | 42 |
Processing area | … | 7.6 | 7.6 | 7.6 |
Mesa length ratio | … | 2.6 | 2.6 | 2.6 |
The motor power | KW | 1.1 | 1.1 | 1.1 |
3, Working Principle
6-s shaker (also known as 6S shaker, beneficiation shaker and FRP
shaker) belongs to gravity beneficiation equipment, developed from
plane chute, and later formed its own system characterized by its
asymmetric reciprocating motion. The 6-s shaker is composed of
three parts: bed surface, frame and transmission mechanism. The bed
surface is trapezoidal or rhombic, with a transverse inclination of
1 ° ~ 5 °. Ore feeding trough and water feeding trough are
configured above the inclined edge. Bed strips are arranged
longitudinally on the bed surface, and their height decreases from
the driving end to the opposite side. The whole bed surface is
supported by a frame, and a transmission device is installed at one
end of the bed surface. The latter can make the bed surface move
forward and have the characteristics of rapid return motion when
approaching the end, which is called differential motion.
4, Folding main structure
The shaker is mainly composed of eight parts: bed head, motor,
slope regulator, bed surface, ore trough, water tank, incoming
strip and lubrication system. Reciprocating motion is realized by
crank connecting rod transmission mechanism. The motor drives the
large pulley to drive the crankshaft to rotate through the belt
drive, and the rocker moves up and down. When the rocker moves
down, the elbow plate pushes the rear shaft and the reciprocating
rod to move backward. The spring is compressed, and the bed surface
is connected with the reciprocating rod through the linkage seat.
Therefore, at this time, the bed surface also moves backward. When
the rocker moves upward, it is pushed by the extension tension of
the spring, Then the bed surface moves forward.
5. Factory manufacturing and scene
Tag:
Iron ore shaker Gold ore shaker Copper ore shaker Gold ore shaker
Nickel ore shaker
